Well almost, need to finish welding everything up but the design is done with the exception of the panhard mount on the frame side. Currently it's 3/16" HRS and I'm going to switch to 1/4" CRS. Also I'll move the pivot out ~1" and up a touch. The thicker material will withstand rock strikes better. Pivot change will reduce bump steer.
Lowered shock mount 1" for more compression stroke. Just clears the steering arm!!
Ram just clears the 3rd member fasteners. I still don't know if I can pull the 3rd without pulling the ram. I'll find out soon when I rebuild the axle and put in the Dirty 30's.
Ram just clears the link tower.
Spring just clears the link tower and full bump/droop.
Full droop.
Full bump passenger side.
Sitting on the bumps.
Moved the axle back ~.500' to get clearance here!
Panhard mount and rear shock mount rework is next..
No comments:
Post a Comment