Started bending up the cage tonight. As with most things it took longer than I expected. Mostly because I bent the hoop to be a tight fit with the roof so it was tough to even test fist. I will say it's a PITA to pull the top off by yourself!! Here you can see how tight the hoop is. Too tight in fact...
Needs to come up 4" but runs into the roof...
Same thing here...
I just need to shrink it an inch on the width and it'll be perfect.
This was my second hoop and will for the forward of the two. It should be a better fit, certainly easier to install.
Trail-gear stuff showed up today. Hi-steer arms, flat pitman arm and ARP knuckle studs.
\
I went with a flat pitman because the truck is going to sit so low with a stock arm the drag link would go UP to the axle just about!
Needs to come up 4" but runs into the roof...
Same thing here...
I just need to shrink it an inch on the width and it'll be perfect.
This was my second hoop and will for the forward of the two. It should be a better fit, certainly easier to install.
Trail-gear stuff showed up today. Hi-steer arms, flat pitman arm and ARP knuckle studs.
\I went with a flat pitman because the truck is going to sit so low with a stock arm the drag link would go UP to the axle just about!
No comments:
Post a Comment